God's Omniscience and Human Free Will - Contradiction Essay

God's Omniscience and Human Free Will - Contradiction - Essay Example Most of the solutions or arguments are aimed at working around the problem rather than resolving it. I believe that there is no way to solve this conflict without denying either God’s omniscience or the existence of free will. In this essay I argue and attempt to prove that God’s omniscience and human free will are not compatible with each other. Omniscience in the simplest form is defined as the knowledge of everything, infinite or complete knowledge. That is, an omniscient God knows and has knowledge of everything, including what is going to happen in the future1. Human free will on the other hand is defined as the ability, power or force of a person to choose what or what not to do. In a more religious sense it is the ability or power to choose or turn away from good or evil2. Hence, definition of omniscient God implies an all knowing God meaning that God knows what is going to happen in the future. If God already knows what we are going to do in the future, it means that our actions are already predetermined and we have no control over the actions that we are going to take in the future. ... God is omniscient or humans have free will, both cannot be possible. Now let’s consider some of the solutions offered to solve the above conflict and see if it actually attempts to prove the compatibility of the two ideas or not. One of the major arguments made by those supporting omniscient God and human free will is that God’s foreknowledge in no way restricts human free will. That is, foreknowledge does not imply causality. Following analogy is used to support the claim: Sun rises tomorrow and knowing this does not cause the sun to rise. Knowing ahead of time does not restrict or cause an event to occur. Similarly, God’s foreknowledge of what we are going to do does not affect our free will to choose what we are going to do. It just means that God happens to know ahead of time what we are going to choose freely. God does not affect our freedom to choose but he simply knows ahead of time that what we are going to choose3. For this argument to work the concept o f time as we know it must be discarded. God is not restricted by the concept of time as we do. To God past, present and future exists at once, i.e, God exists outside of time. The above argument does not make logical sense and can be termed invalid. Let’s assume that humans have free will and are free to choose what they want to do. If an option A is chosen then by the earlier argument God would have known that option A would be chosen ahead of time. If instead of option A, due to free will, option B is chosen then the argument would be that this is what would have been known4. So either way the conclusion that can be drawn is that the future is determined. Irrespective of causing the event to occur or not, the future remains determined in the analogy used. Knowing that the sun

Global sourcing Essay Example for Free

Global sourcing Essay 1) What is global sourcing? Global sourcing is defined as the process of identifying, developing, and utilizing the source of supply for the enterprise through expanding purchasing activities internationally. It is a part of post reengineering activities which is an useful measure of cutting cost. Global sourcing is a typical example of foreign construction outsourcing firms which process construction by distributing each process of construction work to vendors instead of running on its own. Such construction method not only does reduce costs in terms of managing construction sites such as labor cost and equipment cost including vehicles, but also is being adopted by various companies for value-adding construction management (CM) project. For instance, global sourcing was utilized when building Daewoo Business Center at Warszawa, Poland, on March, 1997. The process of erecting the center was alloted to vendors; construction was executed by VOICE(England), design through RTKL(U.S.), facility management was duty of Dongwoo which is a department of Daewoo Group, hotel management by Hilton hotel(U.S.). 2) Global sourcing factors Global sourcing factors that must be understood and balanced can be segmented into 5 categories. First factor is material cost. The bottom line of execution of global sourcing is reduce cost by minimizing material cost. Another category is transportation cost. Various costs including inventory delivery cost can be dwindled through global sourcing. Moreover, significant amount of transportation expense can be reduced when marketing products at outsourcing regions. Cross-border taxes, tariffs, and duty costs are third factor which form global sourcing. Instead of relying on domestic production but rather outsource each process internationally, costs can be reduce by avoiding trade barriers which include cross-border tax, tariff and duty cost. Next factor is supply and operational performance. With effective resource management and cheap labor cost, supply and operational performance can be efficiently managed which enables global sourcing companies to manufacture high quality-low price merchandises. The last category of global sourcing is supply and operational risks. Cultural and geographical disparities can yield additional costs such as labor cost and transportation cost. If not managed thoroughly, they can militate as huge risks in terms of conducting sourcing. 3) Advantages of global sourcing There are three major merits of performing global sourcing; gumption to changes, reduction of cost, and trade barriers avoidance. To begin with, global sourcing allows a firm to develop capacity to cope with changes in market condition. Importing numerous raw materials and resources economically and steadily can be done through global sourcing. With such abundant resources, a firm can flexibly adopt to environmental alterations when confronting unexpected economic crisis. Secondly, average 20% of cost saving is possible. Components of products or raw materials procured from abroad is advantageous in terms of price. Furthermore, many countries such as American and Europe are sourcing materials to cut cost in terms of distribution industries. As a result, China has become the hub of production base for global sourcing. Even in case of Korea, sourcing products from China are 30%~40% cheaper than Korean domestic goods. In particular, simple functional merchandizes whose design and quality are relatively less considered are largely influenced by global sourcing. Consequently, over 70% of commodities and clothes are imported from China. Last merit of global sourcing is evasion of trade barriers. In case of global sourced goods, the price is lower, leading to economical purchase, by avoiding trade barriers such tariffs and cross-border taxes. On top of that, firms are able to acquire restricted raw materials and resource. Thus, unique and competitive products can be created. 2. Case-Study (LiFung) 1) Introduction LiFung is a professional trading company which specializes in global sourcing and was founded in 1906. It functioned as a broker between Asian manufacturers and foreign traders and expanded as a trading company later on. Today, LiFung acts as a professional sourcing and distribution firm focusing on toys and textile. Becoming an intermediary, it reconstructed the business by forming it as a connection and manager of diverse supply chains. LiFung is the representative of smokeless factory without owning any equipment and factories regarding production process from raw material to final goods and distribution of final products. 2) Business area / Present condition LiFung won the rewards in Fabulous 50 selectied by Forbes Asia, 50 for 2012 from Morgan Stanley, and The most influential companies 25 from Business week. The sales of LiFung in 2007 was 92.4 billion in Hong Kong dollars, approximately 36% increase in sales compared to that of 2006. Net income reached 30 billion dollars(2007) and LiFung Co. Ltd. succeed in gaining 19.8% increase in sales (110.7 billion Hongkong dollars)than that of previous year. After 1998, foreign companies such as The Limited, Gymboree, American Eagle, Warner Brothers, Abercrombie Fitch, Bed, Bath Beyond, Tesco, Avon Products, Levi-Strauss, Reebok have become major customers of LiFung, and Royal Ahold, Guess Jeans, Bebe also joined as major customers of LiFung in 2000. As a result, LiFung currently has 68 offices in the 38 countries, and shareholders numbers 17,900. In addition, it consists of 107,000 employees engaged in the business associated with LiFung, especially 40,000 related businesses only in the United States. Thus, it can be said that LiFung has entered plateau stage as a company settling new form of SCM rather than just being a simple trading firm. 3) Platform / Operation System LiFung is one of the enterprises which effectively employ platform strategy. In terms of strategy, LiFung adequately balances SRM and CRM strategy to manage producers and customers. LiFung distributes textile component orders to vendors as soon as receiving orders from textile industries. It makes most of 15,000 subcontractors which are located around the globe. When producing a jacket, for example, LiFung procures materials from diverse vendors; outshell is from Korea, Zipper from Japan, lining is done from Thailand, and trademarks and thread from Hongkong. Fabric is dyed in Southern Asia, China sews, and finally quality inspection and packaging are done in Hongkong. Then, headquarter in Hongkong generally manages cash flow and value-added process. 4) Success Factors Success factors of LiFung can be categorized into three elements. The first factor is IT evolution. Through IT development, product lead time dwindled through forming network among producers and customers, and even efficiently manage vendors. Another facet is SRM and CRM, especially have strength on SRM. LiFung analyze customer’s needs and scrutinize supply chain to meet the desires. Since firms tend to focus on maximizing their capability instead of in accordance with needs, LiFung can otherwise strive to fortify supply chain or value chain for customers. In other words, the key role of LiFung is to direct manufacturers of supply chain to the intended direction. For that specific purpose, it establishes education to producers on scattered network management rather than having strict control system for managing vendors, and emphasizes on trust and active empowerment. Lastly, LiFung follows 30/70 rule, which is to set a standard(from 30% to 70% of total production) on production quota to LiFung. This enables LiFung to have loose liaison among subcontractors. Minimum 30% of total production allows LiFung to possess minimum supply from each subcontractors and prevention vendors from being subordinates can be done by setting maximum 70%. The core objective of this principle is to assure vendors of gaining huge profit from being a member of the network and on the other hand guaranteeing flexibility of business and availability of a room for growth. Other vendors also benefit from the principle by being expose to opportunities to work with others, which help them to learn and come up with innovative ideas. Such principle demonstrates value of LiFung on making supply chain more dynamic and lively. Thus, change in partners frequently happens in supply chain of LiFung. In conclusion, LiFung shows contradictory management of pursuing stable and long-term partnership whereas also demanding loose network instead to forming strict organization. 3. Problem Solution 1) Wage stagnation / Pricing pressure The first problem of LiFung is wage stagnation of China. China accounts for 60% of total global sourcing of LiFung, which means that shift in China impact LiFung heavily. After the economic liberalization of China, China has been able to attract world companies as the most suitable production base due to cheap and abundant labor. As a consequence of substantial growth, China’s wage has been increasing 16% annually. As labor cost takes up the largest portion of garment industry’s costs, Li Fung’s first half of 2011 net income dwindled 18%. Therefore, there is high necessity for finding a new production base(a new partners) and gain price competitiveness through such measure. Second problem is overseas buyers’ desire to lower supply pricing due to high uncertainty from global recession. As shown in the ‘average import price of textile in the U.S.’ graph on the right, the average import price has been continually decreasing, from $3.18 in 2006 t o $3 in 2009. Heavy pressure on supply pricing is having negative impact on net income of LiFung. 2) China U.S Trade conflict Third adversity is potential trade disputes between the United States and China. This trade conflict, which is referred to as protectionism, is noteworthy of a notice as 69% of total production of LiFung is sold to the United States. The United States has criticized China on the currency exchange rate manipulation, along with accusation of exchange dumping. In addition, Section 421 is an article which can be executed in a situation where increased import of Chinese products acts as a severe damage to American domestic industries. Accordingly, it is inevitable to exclude potential trade conflict between two countries on account of high possibility of implementing additional countervailing duty by executing section 421. 3) Expanding partners in Southern Asia In preparation for deterioration of China’s production environment and falling competitiveness of China as a sourcing region, Southern Asia is evaluated as the most practical alternative for strategic sourcing of LiFung. In terms of percentage change in world textile industry sourcing, diminution of China is noticeable, as –7%, whereas Vietnam and Bangladesh show growth, respectively displaying 1% and 20% of sourcing uprising rate. To demonstrate suitability of sourcing to Banladesh, environment of Bangladesh such as social infrastructure and facilities, and educational level should be thoroughly examined. Nevertheless, wage of Bangladesh is much cheaper than that of China, Bangladesh being one third that of China, in terms of only considering unit labor cost. Furthermore, Bangladesh is likely to be significantly equipped with garment-industry infrastructure judging from the large number of textile industries sourcing to Bangladesh. Therefore, it is no hasty conclusion that Bangladesh is the most appropriate region for new production base of LiFung. 4) Quality management system Controlling over 15,000 vendors is demanding and the possible drawback is failure of consistency in quality. Since quality is prerequisite these days, stricter vendor’s quality management system should be made. One of the tools that LiFung can utilize and apply stricter is ‘Vendor compliance index’. There are six indexes LiFung should keep attention to; efficient operation, productivity, process innovation, ensuring the quality, purchase the appropriate law material, and good working condition of labor. By balancing and fulfilling following vendor compliance indexes, LiFung will be able to afford products to customer with coherent quality. 4. Conclusion The concept having used by LiFung is highly familiar to us as global sourcing is also deployed by domestic companies such as Samsung and LG. Global sourcing can be divided into two factors; risk element and opportunity element. These two elements are in trade-off relation which means that change in one element accompanies the other, while endeavoring to maximize opportunity element. Thus, taking advantage of opportunity and risk element in a timely manner is the premise for successful global sourcing and in-depth analysis on local region and strategy should be followed when implementing global sourcing.

Role of Institutions in Social Policy

Role of Institutions in Social Policy Explore with examples the role of institutions in influencing policy outcomes. The following will discuss the role that institutions can or may have in influencing public policy outcomes, and where relevant examples of such influences will be provided. The role of various institutions will be explored, and any differences in the amount or the importance of those organisations in influencing policy outcomes will be analysed. Included in this study of the influence upon policy outcomes that institutions have, will be an evaluation of whether that influence changes with the type of organisation that is being examined, and upon the circumstances in which the policy outcomes are reached and implemented within. How much influence the roles of institutions allow them in the determination of policy outcomes, or policy decision-making can depend on the functions and objectives of the institutions involved in the decision-making process. The influence any institutions have upon policy outcomes or policy decision-making processes varies with the expertise, knowledge, tech nical know how that the institutions have available, as well as the level of access these institutions have to the decision-makers that are mainly responsible for determining policy outcomes. As will be explored the decision-makers that are responsible for the framing and carrying out of policy outcomes will be more likely to be influenced by the institutions that have the most experience and expertise in the policy areas that the decision-makers are tasked with controlling and administering. An area of policy outcomes in which institutions have played roles in influencing the final policy decisions made and actually carried out has been in issues relating to the environment. Institutions that have been involved in studying the environment in general and environmental changes like the greenhouse effect in particular have been able to influence the policy outcomes in relation to taking measures to limit or reduce environmental damage. Academic and scientific institutions alongside environmentalist groups such as Friends of the Earth have played a significant role influencing policy outcomes. There are a few examples of policy outcomes that could be used in support of this statement, arguably strong supporting evidence as well (Jones et al, 2004 p. 600). These groups and institutions believe they can influence policy outcomes by setting the public agenda (Seldon Kavanagh, 2005 p. 5). Prior to the 1960s academic and scientific institutions had a minor role in influencing po licy outcomes with regard to issues concerning the environment. Policy decision-makers would contact institutions that had expertise or knowledge about environmental issues upon an ad hoc basis, for example in the 1950s when the British government wished to solve the problem of smog in the London area. On that occasion institutions gave advice as to the best way of cleaning up the air pollution that had been the cause of the smog (Jones et al, 2004 p. 600). From the 1960s academic and scientific institutions began to suspect that human economic and industrial activities were having a profoundly detrimental affect upon the physical environment. Increased concerns over the environment led to the emergence of pressure groups such as Friends of the Earth and Greenpeace, these groups have tended to attempt to influence policy outcomes by generating publicity to raise public awareness of environment issues (Jones et al, 2004 p. 695). Arguably, the combined efforts of the academic and scientific institutions and the pressure groups have raised international as well as national awareness of environmental issues. Without the publicity achieved by the environmentalist pressure groups, the academic and scientific institutions would have found it much harder to have had any kind of meaningful influence over policy outcomes relating to the environment. In turn the publicity campaigns of the environmentalist pressure groups would have a had minimal i nfluence over policy outcomes without the strong and convincing scientific evidence of human induced climate change and environmental damage presented by the by the academic and scientific institutions. These were research findings that policy decision-makers believed they have had to react to (Coxall, Robbins, Leach, 2003 p. 401). The universal nature and the global scope of environmental issues has meant that institutions and pressure groups have attempted to influence policy outcomes upon a regional or even a global basis as well as at the national level (Jones et al, 2004 p. 599). Now attention needs to be turned to explore when the approach of academic and scientific institutions and environmentalist pressure groups has been able to influence policy outcomes. A good example of this happening was the problem of acid rain, which had its worst affects upon the forests of Scandinavia. Coal fired power stations in Britain were regarded as being the main culprits behind acid rain. Strong scientific evidence produced by research institutions and environmentalist pressure groups proved that this was in fact the case. Pressure from the Scandinavian governments and the European Union coupled with the evidence from academic institutions combined to persuade the British government to take action to solve the problem by cleaning up the emissions from the coal fired power stations (Coxall, Robbins, Leach, 2003 p. 406). Perhaps the first significant example of academic and scientific institutions having a global impact as opposed to a national impact over policy outcomes with regard to the environment was over the issue of damage to the ozone layer. During the early 1980s there was increasing scientific evidence of expanding holes in the ozone layer, which is an important barrier against the more harmful effects and forms of radiation emitted by the sun. The depletion of the ozone layer would not be harmful to peoples’ health, and it would increase the environmental damage caused by the greenhouse effect and speed up the process of global warming. Scientific research proved that the hole in the ozone layer was caused by the chloroflurocarbons (CFCs) used as coolants in fridges and freezers, as the propellants in aerosol cans, and in fast food packaging. Media coverage of the problems that the shrinking of the ozone layer was causing increased the ability of institutions to influence policy ou tcomes. International agreement was eventually reached that the use of CFCs would be phased out with less harmful alternatives being used instead (Jones et al, 2004 p. 600). As the scientific evidence of the greenhouse effect grew the role of academic and scientific institutions in influencing policy outcomes has increased as well. Countries such as the Netherlands, Germany, Sweden, and eventually Britain have made efforts to reduce the emission of greenhouse gases (Judt, 2007 p. 494). The efforts of institutions concerned with protecting the environment has also strongly affected and influenced the European Union, which has introduced legislation, regulations, and directives for its member states to take policy measures to reduce the emissions of greenhouse gases and achieve sustainable development. Attempts to reduce their emissions of greenhouse gases culminated in the Rio Earth Summit, and the later Kyoto Protocol (Coxall, Robbins, Leach, 2003 p. 407). Currently there are ongoing talks to renew the Kyoto Protocol. Over all policy decision-makers have to take into account the environmental affects of the policy outcomes they make decisions on (Coxall , Robbins, Leach, 2003 p. 406). An area in which institutions can play a major or significant role in influencing policy outcomes is in relation to medical and public health issue. Hospitals, medical centres, universities, doctors, and nursing unions are all institutions or organisations that influence or attempt to influence policy outcomes. Governments believe that they have a responsibility to ensure that their policy outcomes if possible protect and enhance public health and safety standards. Doctors, nurses, universities, and hospitals also have good reasons to promote public health issues, mainly as that is important part of their objectives as institutions and skilled professionals. When it comes down to these institutions or groups influencing policy outcomes, those that have firmly focused public health and safety objectives are more effective if they have a strong or well developed expertise in their area of specialisation. In Britain the medical institutions that are linked with, or are actually part of the National Health Service (NHS) potentially have a strong influence on health policy outcomes. For instance, doctors and the medical departments of universities have played in developing new medical treatments, diagnosing new diseases, and researching for cures to illnesses. These institutions have helped to progressively improve the quality and quantity of healthcare services and medical treatments available, allowing for increased life expectancy. For instance organ transplants, better cancer treatments, and drugs that delay the onset of the HIV / AIDS virus have all been developed since the 1960s. These medical achievements were primarily developed to prolong both life expectancy and quality, which after all is the purpose of all medical professions (Hobsbawm, 1994 p. 556). However, universities, medical research laboratories, and pharmaceutical companies also motivated by the opportunities to raise their reputations for expertise, as well as hoping to gain substantial financial rewards (Hobsbawm, 1994 p. 556). Decision-makers that are part of publicly funded health services such as the NHS in Britain can have another major influence over policy outcomes, aside from the influence of medical institutions. That other influence is often decisive in the final determination of policy outcomes, and that is the issue of funding. The majority of the British population has high expectations of the NHS, and they expect or hope that all new medical treatments will be available to patients as soon as those treatments are required. Despite public expenditure on the NHS increasing every year, medical treatments have to be rationed out or provided on the basis of which patients need treatment the most urgently (Seldon Kavanagh, 2005 p. 296). The splitting up of the N HS budget into individual budgets for each health trust unit also means that medical institutions now have to attempt to influence policy outcomes at the health unit trust level as well as at the national level. Although the introduction of health trust units was intended to improve efficiency within the NHS, it has also meant that the medical treatments that patients may or may not receive depends on which area of Britain they live in (Seldon Kavanagh, 2005 p. 297). Of course those people that chose to have private healthcare there is no worry about their medical treatments being rationed or not available in some areas, all they have to do is have enough money or insurance to pay for their treatment in the first place (Moran, 2005, p. 54). Medical institutions can have an influence over policy outcomes when they diagnose or discover new illnesses, or when they wish to change people’s behaviour to prevent illnesses. When medical institutions diagnose or discover new illnesses it can have drastic consequences, and therefore have a significant influence upon policy outcomes. A prime example of a new illness having such a significant effect on policy outcomes was over the issue of mad cow disease in Britain. The issue of mad cow disease cut across agricultural, trade, and medical areas of government policy. The origin of the crisis began with the farming practice of feeding cattle food that inadvertently used the brains of sheep infected with scrapie, and subsequently led to the emergence of mad cow disease or Bovine Sponigform Encephalopathy (BSE). Medical and scientific evidence proved that BSE could be passed on to humans through the food chain. People infected in such a way went on to develop variant CJD, for wh ich there is currently no cure, and it invariably kills those infected. The initial reaction of the British government to the BSE crisis was slow, and seemed to ignore advice and evidence provided by agricultural and medical institutions in a vain attempt to protect the British beef industry (Fisher, Denver, Benyon, 2003 p. 123). Indeed the slowness of the government’s reaction meant that the problem got better rather than worse. The government’s efforts to maintain public confidence in the safety of British beef proved unconvincing. The testing of cattle herds for BSE infection was too slow, leaving the culling of entire herds as the only means of tackling the problem. The government was also slow in issuing safety guidelines in the NHS which meant that blood and organs unknowingly donated by variant CJD victims was used in blood transfusions and organ transplants which therefore infected more people (Moran, 2005 p. 433). The whole handling of the BSE issue clearly demonstrates that if politicians or policy decision-makers within the government fail to heed the advice of suitably qualified or experienced institutions that it can have disastrous consequences in terms of policy outcomes. Tackling an issue before it becomes an intractable problem can be the difference between damage limitation, and unmitigated policy failure (Moran, 2005 p. 433). The delays in tackling the BSE issue meant that peoples lives were put at risk unnecessarily, whilst the European Union ban on British beef and any of its by-products was highly damaging to the British beef industry (Fisher, Denver, Benyon, 2003 p. 123). The measures taken to restrict and eventually got rid of BSE cases in British cattle. However the gestation period of variant CJD means that it will be some time before there are no cases at all. The BSE free status of British cattle did eventually lead to the lifting of the ban on British beef exports (Moran, 2005 p. 433). Institutions have been able to influence policy outcomes when it comes to taking preventative health measures. For instance, reducing the number of smokers, heavy drinkers, and the number of people that have heart disease. Medical institutions have been aware for quite some time that many health problems are preventable, especially if people change their behaviour. An example of medical institutions having a strong influence on policy outcomes has been in reducing the number of smokers. Smoking has been proven to be a major cause of various types of cancer, heart disease, high blood pressure, and strokes. Anti-smoking groups and medical institutions have sought to influence policy outcomes to reduce the numbers of people killed by smoking related illnesses. Policy outcomes have included a ban on cigarette advertising, government health warnings on packets, and hard -hitting NHS adverts showing the consequences of smoking upon people’s health. Governments have also raised duty levels on cigarettes to persuade people to give up smoking, although this has only had limited success (Seldon Kavanagh, 2005 p. 297). The Scottish Parliament took evidence about the harmful effects of smoking from medical institutions, and voted to ban smoking in public places. That decision proved to be the catalyst for the Westminster Parliament to do like likewise in 2006 (Whitaker’s, 2007 p. 1067). Data shows that increasing numbers of British smokers wish to stop, 598,600 attempting to do so in 2006 alone (Schott, 2006 p. 109). Attempts by medical institutions and the Police to reduce heavy drinking have not been so successful. Whilst the government has tried to reduce the amount of binge drinking, most steps have been done voluntarily by the drinks industry to avoid tougher measures been taken. Medical institutions are opposed to heavy drinking due to the medical damage it does, whilst the Police can prove the link between alcohol consumption and crime. The government also decided to extend licensing so pubs could stay open for 24 hours a day, a policy outcome that seems to contradict the objective of reducing alcohol consumption levels (Coxall, Robbins, Leach, 2003 p. 330). Britain according to research is the country with the third largest frequency of binge drinkers in the European Union, after Finland and Ireland (Schott, 2006 p. 109). In terms of reducing the risks of heart disease, high blood pressure, and strokes, medical institutions seem to have had more influence with food and drinks producers t han with the decision-makers that decide policy outcomes. Once again the government prefers that companies make their products healthier on a voluntarily basis. Governments also prefer not to alienate too many businesses by affecting their ability to make profits (Jones et al, 2004 p.599). Another way in which institutions can have an influence upon policy outcomes is by being involved with organisations or committees that can determine policy decisions. Such organisations are referred to quangos or quasi-autonomous non-government organisation, and they control many areas of public decision-making and expenditure (Comfort, 1993 p. 493). The definition of quangos is now national rather than non-governmental, as they are part of the governmental structure even they are not part of departments or the civil service. Quangos have various functions and therefore levels of power and budgets. Quangos such as regional development bodies have large budgets, and community institutions could have stronger influences on policy outcomes than national institutions. Other Quangos such as regulatory bodies like Ofgem are meant to regulate private businesses rather then being influenced by institutions (Coxall, Robbins, Leach, 2003 p. 332). Quangos therefore have a great deal of inform al power, so to influence with any of them can allow institutions to gain influence over policy outcomes (Jones et al, 2004 p. 663). Potentially institutions could gain influence over policy outcomes by having some of their representatives joining any quangos that operate within their areas of interest or expertise. Alternatively quangos often have the power to award lucrative contracts, or grant funding for research or community projects, that provides further incentives for institutions to gain access to those quangos that can decide policy outcomes. There are quangos that are linked to the relevant government departments, some of which could provide institutions with the ability to communicate with ministers. Some would argue that quangos are undemocratic, and increase the chances of corruption, although ministers can make them accountable to the government if not to Parliament (Fisher, Denver, Benyon, 2003 p.371). Both the Conservatives and New Labour have made widespread use o f quangos when in government as they argued that quangos make governance more efficient (Jones et al p.664). Another way in which institutions are able to influence policy outcomes is through publicity campaigns, and lobbying the government to make decisions that favour their objectives. Such a mode of operation can mean that the behaviour and strategy of institutions is very similar to pressure groups (Fisher, Denver, Benyon, 2003 p. 171). Publicity campaigns can be either positive or negative in their tone, depending on whether institutions want to encourage or discourage certain decisions (Judt, 2007 p. 544). Examples of positive campaigning include universities encouraging the introduction of tuition fees to fund increasing numbers of students, or campaigns to fund new hospitals or new medical treatments (Seldon Kavanagh, 2005 p. 272). More negative campaigns have included medical institutions resisting any reforms of the NHS that they do not like. These campaigns have proved highly effective, as even the Thatcher government could not attempt to dismantle the NHS (Judt, 2007 p. 544). Therefore it could be concluded that institutions could play a significant role in influencing policy outcomes. However, no institution is guaranteed to play a significant role in influencing policy outcomes just because it exists. The roles that institutions play in influencing policy outcomes varies with circumstances, whether the government of the day has strong ideological beliefs, the expertise, campaigning skills, and the objectives of each individual institution. Governments will naturally tend to favour the institutions whose views and objectives are similar to their own, although governments also like to pursue policies that improve their chances of re-election. However, that does not mean that governments are unwilling to hear the opinions of institutions if those institutions lobby the government to influence policy outcomes. Institutions are more likely to succeed in influencing policy outcomes if they can provide strong evidence to back up their arguments or policy sugge stions. Governments prefer to adopt policies that they can convince the electorate is necessary to improve public services, could improve the standard of living, or prevent things going wrong. Examples of governments being influenced by institutions that have altered government policy include taking the environment seriously, measures to reduce smoking, and steps taken to deal with the BSE crisis. The failings that the initially inept handling of the BSE crisis demonstrated that institutions cannot always have had an influence on policy outcomes, and may only be consulted after things have gone wrong. Bibliography Coxall B, Robins L Leach R (2003) Contemporary British Politics 4th edition, Palgrave, Basingstoke Fisher J, Denver D, Benyon J, (2003) Central Debates in British Politics, Longman, London Hobsbawm, E (1994) Age of Extremes, the Short Twentieth Century 1914-1991, Michael Joseph, London Judt T, (2007) Post-war – A History of Europe since 1945, Pimlico, London Moran M, (2005) Politic and Governance in the UK, Palgrave, Basingstoke Schott B, (2006) Schott’s Almanac 2007, Bloomsbury, London Seldon A Kavanagh D, (2005) The Blair Effect 2001 – 5, Cambridge University Press, Cambridge Whitaker’s, (2007) Whitaker’s Almanack 2007 – today’s world in one volume, A C Black, London

Anorexia Essay -- essays research papers fc

It seems today that eating disorders are on the rise. While this may be true, the numbers may appear to grow only because more cases are being brought out into the open. The purpose of this paper is to discuss eating disorders and prove the these disease, specifically Anorexia Nervosa, continue to plague of women due to psychological and environmental factors along with pressure from the media. The term â€Å"Anorexia Nervosa† is misleading. It means â€Å"loss of appetite due to nerves.† But people with anorexia don’t actually lose their appetite until the late stages of their starvation. Until, they do feel hungry, but they just won’t eat. People affected by anorexia have an extreme fear of gaining weight. In addition to drastic dieting, they may resort to vomiting and the use of laxatives and diuretics to lose weight. Statistics show that many teens and young adults suffer from anorexia nervosa. Without treatment, anorexia nervosa can cause serious heal th problems--even death! The sooner treatment begins the better the chances for a full recovery. The person with another anorexia is a model child. He/She is well behaved, eager to please, and a good student who gets along well with her peers. She rarely admits that anything is wrong or that anything is wrong or that she/he extra helps. Behind the mask is an insecure, self-critical perfectionist who feels unworthy of any praises she receives. A person who has anorexia is also very concerned about whether other people like her. Occasionally, she feels that there’s something wrong with her- that she’s bad or that her thoughts are disgusting. (PennSAHIC) One interpretation of an eating disorder is termed as a relationship between the person and food the appears abnormal. Anorexia Nervosa is one of the most prevalent eating disorder decease. The definition of Anorexia, Dr. Barton J. Blinder gives an interpretation similar to this: Anorexia is an all-encompassing pursuit of thinness, occurring most often in adolescents and young adult woman. This is accomplished by avoidance of eating by any means possible. The person affected by Anorexia has an absolutely terrifying fear of becoming obese. In short, â€Å"food becomes the enemy;† one researcher described Anorexia as â€Å"weight phobia.† (noah.cuny.edu/wellconn/eatdisorders.html) Some experts believe that a fear of growing up is the root of the problem. Other experts see the d... ...l keep their body into shape. Parents do not like to see children being teased because of their weight so they try to keep them fit. Sometime the stress from the parents and/or if there is any physical or sexual abuse in the family, the child in this situation may lead to an eating disorder to have a way to control something in their life. In conclusion, Anorexia Nervosa greatly affects all that are touched by it. Close family members and friends go through fighting battle with the person helping to serve this deathful battle. The information in this paper is just touching briefly on what can happen to someone with this disease called Anorexia. It is important that people are aware of these problems, know how to spot eating disorders, and help someone else or themselves overcome something like Anorexia. Works Cited: Matthews, John R. Eating Disorders. New York: Facts on file Inc. 1990 http://noah.cuny.edu/wellconn/eatdisorder.html Self-Help & Psychology Magazine- written by Lee H offman, Office of Scientific Inf., NIH Publication No. 94-3477, 1993. http://www.cybertowers.com/selfhelp/article/eating/nih/anorexia.html PennSAHIC booklet by Channing L. Bete Co., Inc. 1996 edition.

The hydraulic energy

IntroductionThe potency of utilizing a KERS on a bike to hive away hydraulic energy can be achieved utilizing a device such as a hydraulic collector. In a hydraulic collector the possible energy is stored in the signifier of a tight gas or spring, which is used to exercise a force against a comparatively incompressible fluid. Collectors store energy when the hydraulic system force per unit area is greater than the collector force per unit area and releases hydraulic energy in the opposite instance. By hive awaying and supplying hydraulic energy, collectors can be used as a primary power beginning for a KERS. Collectors are of course dynamic devices ; intending they function when constellation alterations, for illustration, valves opening and shutting. Collectors respond quickly to constellation alterations, and about outright for gas collectors. They are normally used in concurrence with a pump/motor in a hydraulic circuit. A hydraulic system using an collector can utilize a smaller fluid pump since the collector shops energy from the pump during low demand periods. The pump does n't necessitate to be so big to get by with extremes of demand, therefore the supply circuit can react more rapidly to any impermanent demand and to smooth pulsings. There are four types of collector: vesica, stop vesica, Piston ( spring or gas controlled ) , and metal bellows. Depending on the application, the pick of most suited is based on the needed velocity of collector response, weight, dependability and cost. Compressed gas collectors are the most normally used type since they by and large have the faster dynamic response and are most dependable. Collectors with seals will by and large hold the lowest dependability as there is the possible for leaks. Pressurised gas collectors take advantage of the fact, that the gas is compressible. The possible to hive away energy and the affect of the collector is dictated by its overall volume and pre-charge of the gas. The pre-charge is the force per unit area of the gas in the collector when there is no hydraulic fluid within the collector. Too high of a pre-charge force per unit area, reduces the fluid volume capacity, and limits the maximal sum of hydraulic energy that will be available to the system. A gas collector has a gas pre-charge, which is less than the nominal hydraulic system force per unit area. When hydraulic fluid enters the collector, the gas is compressed to the nominal system force per unit area, which is in an equilibrium place and corresponds to the maximal sum of energy that can be stored. As system hydraulic force per unit area beads, the gas will spread out coercing hydraulic fluid back into the system. Most gas collectors are bladder type, made up of a vas divided into two volumes, by a flexible membrane. Within the vesica, N is stored under high force per unit area, which is an efficient and safe medium since the ability of gas to hive away energy additions exponentially as force per unit area rises and because of its inert belongingss. As fluid from the hydraulic circuit, enters the vas ( under system force per unit area ) and impinges against the vesica, the gas is compressed leting energy to be stored. The release of energy when required is achieved via conventional valve agreement.Use of hydraulic KERS commerciallyThere are, a figure of emerging systems that allow the operators of vehicles to cut down both fuel ingestion and unwanted emanations, specifically to vehicles that are capable to changeless stop-start operations, like for illustration coachs, decline aggregation vehicles ( RCV ) . Changeless stop-start operations, such as braking in big vehicles, produce considerable kinetic energy, which is wasted as heat. Capturing this energy utilizing conventional hydraulic engineering enables it to be stored and so returned to the vehicle systems. The possible utilizations are non merely limited to help subsequent acceleration ( cut downing the energy required from the engine ) , but can potentially power accessory equipment. For illustration, RCVs can utilize stored energy to drive the hydraulic garbage compacting and packing mechanisms. This enables a important decrease of engine velocities and runing noise [ 10 ] .Hydraulic Power Train TechnologyHybrid hydraulic power-train engineering usually incorporates a hydraulic system runing analogue to the IC engine to portion the undertaking of powering the vehicle. Although other agreements are possible ( in series ) , the simplest is where the conventional vehicle transmittal and driveline constituents are replaced by a hydr o-mechanical transmittal, a system that works likewise to a hydrostatic CVT. In which the end product shaft from the vehicle ‘s engine is used to drive a hydraulic pump that in bend supplies pressure to hydrostatic motors ; these are so connected via a pitching mechanism to the vehicle power-train to drive the wheels [ 10 ] . These motors so, under braking, act as pumps to bear down collectors, where energy is stored before being released back to the power-train, conveying torsion to the driveshaft and impeling the vehicle. Fig depicts the capturing and releasing of energy in a hydraulic circuit.Examples of Commercial Hydraulic KERSThere are two commercial merchandises of hydraulic intercrossed KERS on today ‘s market and both are implemented on bringing vehicles and decline truck applications. These are Parker Energy Recovery System [ 6 ] , and Eaton Hydraulic Launch Assistâ„ ¢ ( HLA ® ) [ 7 ] .Prototype testing proposes typically regenerative braking capableness c aptures about 70 % of the KE produced during braking, minimising the burden on the engine, and assisting to cut down fuel ingestion [ 9 ] . The hydrostatic motors, when moving as pumps during vehicle braking, besides help to decelerate the vehicle down by bring oning retarding force on the revolving drive-train ; a characteristic that helps to cut down brake wear [ 9 ] by more than 50 % [ 8 ] . Generally these systems operate at a maximal force per unit area of 5,000 PSI [ 9 ] . The intercrossed engineerings are controlled by specialised systems that are activated upon braking. The controls prevent service brake application until merely before a complete halt. They besides monitor if the energy stored in the collector falls below a preset degree, upon which the vehicle engine can be used to supply auxiliary power. However, on vehicles with frequent stop-start rhythms, this is rarely required as even soft braking is sufficient to keep the stored energy at high degrees. The HLA ® has two manners of operation, â€Å" Economy Mode † and â€Å" Performance Mode † . When the operating in â€Å" Economy Mode † , the energy stored in the collector during braking is used entirely to ab initio speed up the vehicle. Once the collector has emptied, the engine will get down to execute the acceleration. This procedure consequences in increased fuel economic system of 30 % and provides increased acceleration of 2 % [ 7 ] . Economy manner allows for upper limit fuel nest eggs & A ; maximal exhaust emanation decreases of 20 % to 30 % [ 7 ] . In Performance Mode, acceleration is created by both the energy stored in the collector and the engine. Once the collector has emptied, the engine is wholly responsible for acceleration.While a 17 % addition in fuel economic system is possible, the greatest benefit is an increased acceleration of 26 % [ 7 ] . The benefits of intercrossed solution are legion ; reduced emanations, increased brake life, and better fuel economic system. The engineering besides allows the possibility to cut down the size of the vehicle engine as this can be sized for extremum velocities, instead than for low-end torsion.Application of Hydraulic KERS to a BicycleA squad of technology pupils from the University of Michigan [ 1 ] undertook a undertaking to utilize a hydro-pneumatic regenerative braking system on a bike. It was a renovation of a heavier old effort to do a working paradigm to suit within a 29 † forepart wheel ( fig ) . They use a 0.5 liter collector and believed this to be sufficient in hive awaying the needed energy at a maximal on the job system force per unit area of 5000psi. It ‘s weighed an impractical 13kg about every bit much as a motorcycle and is its major drawback, its weight can be accounted for by its separate high and low collectors, separate hydraulic pump and motor and it s comparatively big mounting bracket.CalculationsThey failed to prove and therefore supply conclusive consequences for the public presentation features of their paradigm, but alternatively prescribed its cardinal public presentation parametric quantities via theoretical computations. In the same manner and based on the same computations the undermentioned subdivision outlines the public presentation of a hydro-pneumatic KERS.Storage CapacityFirst for a hydraulic system to be implemented the storage of fluid must be addressed, the capacity must be determined and force per unit areas needed to hive away the kinetic energy. The combined mass of bicycler and bike ( 90kg ) braking from 32km/h ( 20mph ) has 2880kJ of kinetic energy. Parker [ 5 ] ( industry of collector and motors ) rates the ACP series collectors at max force per unit area 5000psi, if presuming ideal gas jurisprudence:BrakingA hydraulic KERS must utilize a hydraulic motor to supply plenty torsion to run the bike every bit good as supplying adequate resistive torsion to be an effectual brake. If the bike going at 32km/h ( 20mph ) on 0.66m ( 26inch ) diameter wheels, which spins the motor at 4632rpm through the 18:1 gear ratio of the pump cogwheel train, so this corresponds to 4.52Nm of torsion at 3000psi ( fig ) . This translates to a braking torsion of about 81.36Nm applied to the chief cogwheel due to the 18:1 cogwheel ratio.EstablishingOn release of force per unit area, a to the full charged 5000psi collector generates 7.57Nm of torsions ( fig ) . The 14:1 gear ratio of the motor gear train applies a 105 Nm torsion to the chief bike bunch cogwheel. 7.57Nm corresponds to around 800rpm from motors torque rpm curve ( fig ) , which turns the chief cogwheel at around 57rpm due to the 14:1 cogwheel ratio. This is an initial velocity of 8km/h ( 5mph ) which will increase as force per unit area is expended.AdvantagesIn many applications, particularly those where high power densenesss are required, hydro-p neumatic systems offer a more efficient option to system driven by electric motors. The engineering can be used to capture and reassign high degrees of energy highly rapidly compared with likewise sized electric systems, which by and large require long periods over which batteries have to be charged. They are besides likely to hold a longer runing life than battery-powered systems.DisadvantagesThe chief disadvantage of a hydro-pneumatic KERS would be its weight, which is attributed to by weight of hydraulic fluid, collector stuff ( steel ) , and the fact that in application it would be necessary to hold separate high and low force per unit area collectors. Equally good as potentially necessitating separate hydraulic pump and motor. In hydro-pneumatic systems when the gas is non charged by the hydraulic fluid and therefore non hive awaying energy, the fluid can be considered dead weight. If implemented on a bike to be used as a KERS, this would be counterproductive. Last hydro-pneumatic systems are limited where consistent degrees of power are required for drawn-out periods at near changeless velocities, such as long-distance cruising.DecisionThe major consideration when utilizing hydro-pneumatic collector for hive awaying the energy whilst braking, is of class the loss of pressurized gas in a certain collector. It is a failure critical to safety when it plays such an of import function as braking. It is evident the hydraulic collector needed for a KERS, does non hold an overly big capacity ( pre-charged to 3200psi ) , in order to let go of adequate energy to impel a motorcycle to 32km/h ( 20mph ) . Furthermore, a hydraulic motor can bring forth 81.36Nm braking torsion which makes it an effectual brake. However based on the weight of the paradigm ( 13kg ) from the University of Michigan, it is impractical to utilize a hydro-pneumatic engineering, as it stands presently, for a bike KERS.

Making Hiding Haelo in the Reedsy Book Editor

Making Hiding Haelo in the Reedsy Book Editor Making Hiding Haelo in the Reedsy Book Editor Tara Holladay is the author of Hiding Haelo. We're thrilled to share with you that she used the Reedsy Book Editor to print her book with Amazon's KDP Print. Since we felt that being able to export a print ready file straight from your browser will empower many authors who want to self-publish, it was a proud moment for us when we actually saw this beautiful book for the first time. Read on to know how Tara went from manuscript to printed book.My fellow Reedsy-ites, I am a perfectionist. When it came to Hiding Haelo, the first book in my YA series, I wanted every step of the way done right. Years of writing, editing, marketing prep, and an incredible amount of industry research brought me to a point of exhilarated exhaustion. (Just go with me on that. It totally makes sense in my head.)   Each step both thrilled me with progress and hammered me with work.I'm also a voracious reader, at one point plowing through five or six novels a week. (Pregnant. Six months of bed-rest.) A signif icant portion of those novels were cheap, self-published Kindles. At six a week, they had to be cheap. I saw every self-pub mistake in the book. Literally. Both on the voice/plot/content end of things, and the proofreading/formatting end of things. It drove me crazy.The Reedsy Book EditorAs thrilled as I am with the final printed novel, I greedily look forward to the updates. The Editor is really good, and it's only getting better.I still get butterflies when I think back to day my first printed â€Å"proof† copy arrived at my doorstep. What an incredible time to be an author! There is an unprecedented amount of resources at our fingertips. With more resources, comes higher quality. And higher quality allows indie author-publishers a bigger stake in influencing the publishing industry. The reputation with self-published books is changing for the better.Props, Reedsy. You’ve given us authors the ability to format a clean, beautiful book. And I now have a bigger budget f or marketing than I would have otherwise. I can’t wait to see what else is in store for the future.You can find Hiding Haelo on Amazon here!Have you tried using the Reedsy Book Editor yet? If so, what's your experience been? We're working on making it better every day, so please leave us your thoughts in the comments!

Hofstede Essay Example

Hofstede Essay Example Hofstede Paper Hofstede Paper Hefted cultural dimensions analysis with multinational business management France, Britain, Germany , Italy Today, the world economic integration process , the companys multinational operations has become an unstoppable trend . But the Eastern and Western cultures have a huge difference . It is easy to generate conflict in business management. Cross-cultural management refers to: multinational companies operating in the presence of various cultural differences of people and things , management mechanisms, and properly handle the cultural conflict, maximize the potential of employees and to achieve corporate tragic goals. Hefted cultural dimensions contains five areas : power distance ( PDP ) * uncertainty avoidance (AJAX) individualism vs.. Collectivism ( DIVIDE). Masculinity vs.. Femininity ( MASS), long term vs.. Short term ( L TO ) . France China and France, as the East and the West has a long history and cultural traditions of the country, there are many differences between them on the Hefted cultural dimensions. Dimensions China France Hefted cultural From the table we can know that : France can accept a large power distance(PDP) . They urgently required to prevent operation of the uncertainty Therefore organizational structures tend pyramid . But the weakness of this pyramid structure is unwieldy information communication So the manager must know:French prefer to accept hierarchy . They focus on the relationship between family members backup , And hierarchical relationship between monarch. France on individualism vs.. Collectivism (DIVIDE) score far more than China . This means that in their society, individualism is the mainstream cultural values , and more respect for the value of the individual . So France is individualism . In sometimes French people do not like to be too intimate tit others , in order to avoid loss of independence. In the Masculinity vs.. Femininity (MASS) , China on MASS score higher than France . It shows that China tend to male values of society , but France tend to female social values. France focus on harmonious culture. France score high on uncertainty avoidance (AJAX) , so It has a strong uncertainty avoidance culture . It is the idealism, and it pursues absolute truth . The French dont like surprises . Before meetings and negotiations they like to receive all necessary information. From the number of the long term vs.. Horn term (I-TO) , we now Chinese culture are long-term oriented,however French culture is short- term oriented culture . French people like instant results . For most people they pay more attention to the current situation . Because in their view , the future is ambiguous , the most real physical presence in the here and now . People tend to make decisions and g et results quickly . They are accustomed to always adjust policy. In summary , Managers can not ignore to shape the value of the companies jointly . Common values can guide and encourage all employees to achieve business goals and work together . Learn from each other , and exert their own cultural superiority . At work , managers should arrange the main task , and every employee clear their jobs . The most important things is communication . France advantage is its advanced management concepts , management system is perfect standard operating procedures . Then the company should establish a strict hierarchy , respect the majority peoples view . France tend to female social value , so the company need to ensure the quality of life of employees . The wages make employee satisfaction , and respect for their human rights . Germany Germany is a rigorous and realistic national , It has a significant cultural differences between China . China France Hefted cultural dimensions Germany gets a low score on PDP , we can know it is a low power distance countries . A direct and participative communication and meeting style is common . Employees will not be too dependent on leadership , they like to solve the issue through discussion . Employees are free to close the boss , and they can make the difference ideas . But the final decision lies in the hands oaf big boss . The situation is similar to China . The score on DIVIDE is Geiger than China . Individualism is highly recognized in Germany . In Collectivist societies people belong to in groups that take care of them in exchange for loyalty . The German society is a truly individualistic one . Loyalty is based on personal preferences for people as well as a sense of duty and responsibility. This is defined by the contract between the employer and the employee. Communication is among the most direct in the world following the ideal to be honest, even if it hurts and by this giving the counterpart a fair chance to learn from mistakes. The similar score teens China and Germany in MASS . The high score represent the society will be driven by competition. People rather live in order to work and draw a lot of self-esteem from their tasks. Managers are expected to be decisive and assertive. Status is often shown, especially by cars, watches and technical devices. On AAU Germany is high than China . Germany has a high uncertainty avoidance . In combination with their low Power Distance, where the certainty for own decisions is not covered by the larger responsibility of the boss . In the target management process , Germans prefer to compensate or their higher uncertainty by strongly relying on expertise . In the corporate decision-making process, managers must allow employees to participate in the discussion and implementation of independent decisions, individual responsibility . The companys rules and regulations must be strictly and fine German employees compare advocating self- realization, and therefore in their daily work managers should encourage employees and listen to their suggestions . Germany has a strong heart to prevent uncertainty, but the extent of the right to the gap in the middle of the Tate, and therefore in their daily work to be considered. The PDP score is 35 , it is low . We know British power distance is small, so the business management in the UK, on the lower level are equal. Meanwhile, in order to work more convenient, you can always change between the posts. Britain stressed that equal rights, not the concentration of power . During the meeting employees can express their suggestions . A sense Of fair play drives a belief that people should be treated in some way as equals . There is a high score on DIVIDE(89) . Britain is a county that emphasizes individualism, they ore emphasis on the value of their own recognition. Usually after receiving a task, they are more willing to achieve through their own efforts, rather than seeking help for their own purposes. On weekends or holidays, the British prefer to produce their own furniture, trim gardens, making crafts, its not just the development of personal skills, and a way of leisure, but also reflects the Englishman for the individual pursuit. The score on MASS is 66 , Britain is a country masculine bias, not a pure enjoyment of national life . The dominant values in society are caring for others and quality of life . In ordinary life, and still can not cover the feisty British heart, for the details of life, they always want to be perfect. And they have been known as a gentleman, very eager to succeed . In comparison to feminine cultures such as the Scandinavian countries, people in the I-J live in order to work and have a clear performance ambition. Luaus score is 35 , In this regard, the British have a weak uncertainty avoidance. Britons prefer huge change, do not like risk averse. Because Britain grace like innovation, leading them ahead of other countries in the first industrial revolution. And they are also strong emerging technology than any other country. But relatively conservative British in some ways, like life under the old regime . But the detail of how we get there will be light and the actual process fluid and flexible to emerging and changing environment. Planning horizons will also be shorter. Most importantly the combination of a highly individualistic and curious nation is a high level of creativity and strong need for innovation . Englishman always reflect the people-oriented philosophy, emphasizing that everyone is equal, so leaders must pay attention to the daily management and more. They do not want too much innovation, more to realize their value . Managers should respect each employee, and certainly their value , do well in rewarding good work . For the creation of the post of the company should not be too rigid, so that employees have greater opportunities for promotion, so better to stimulate the British feisty character . Italy The score of the PDP is 50 , it is the middle number . This dimension shows that Italians expect power distance . Northern Italy tends to prefer equality and a decentralization of power and decision-making . They like to make fun f authorities and breaking rules seems to be an Italian hobby . Before being invited to do so, you should say Signore or Signora followed by their last name and maybe even adding personal titles . The highest score is DIVIDE (76) . Let means Italy is an Individualistic culture . It has a slightly different meaning: someone that you know and can be useful for introducing the important or powerful people. They could see only themselves and their immediate family as relevant and important when being individualistic. Most Italians prefer doing business with people they know and trust. Decisions are then made within the in-group and meetings are used most of all to inform the other people about the outcome . The score on MASS is higher than China that the society will be driven by competition , achievement and success . Children are taught from an early age that competition is good and to be a winner is important in ones life. Italians show their success by acquiring status symbols such as a beautiful car, a big house, a yacht and travels to exotic countries. As the working environment is the place where every Italian can reach his/her success, competition among colleagues for making a career can be very strong. The second highest score is 75 on AAU . Italy, the people tend to be more risk-averse . Formality in Italian society is important and the Italian penal and civil code are complicated with clauses , codicils etc . In Italy the combination of high masculinity and high uncertainty avoidance makes life very difficult and stressful . To release some of the tension that is built up during the day Italians need to have good and relaxing moments in their everyday life , enjoying a long meal or frequent coffee breaks . So Italian people are eve warm, mood, and full of strength . In business, this dimension leads to rather formal behavior,where subordinates should not call their superiors by their first name , so some people should be polite . Managers must be careful scheduling, but do not let employees do too much risk or unpredictable thing . General manager must be very warm, full of strength, drive employee motivation Young people do not like to be controlled and the attack in the form they prefer the teamwork and open management style .

Ascaris lumbricoides Essays

Ascaris lumbricoides Essays Ascaris lumbricoides Essay Ascaris lumbricoides Essay It focuses on the incidence of ascariasis among children which consist of the disease profile and corresponding medication or treatment. It also provides information the reasons behind acquiring ascariasis. Ascaris is a soil-transmitted helminth, which means that the soil plays a major role in the development and transmission of the parasite. It causes varying degree of pathology: 1.) intestinal irritation to the adult and 2.) other complications due to extraintestinal migration. Soil-transmitted helminth infections like ascariasis are diseases of poverty. They contribute to impairment of cognitive performances and growth of children. (Cabrera B. and De Leon B., 2004). Ascariasis is a disease of humans caused by the parasitic roundworm Ascaris lumbricoides. It is prevalent in tropical and sub-tropical regions where hygiene is poor. Ascariasis is most common in tropical areas with poor sanitation and in Asia, where farmers use human feces as fertilizer. In the United States, its more prevalent in the south, particularly among people ages 4 to 12 (L. Williams 2005). Experts estimate that 25 percent of the world’s population plays host to the worm. In some underdeveloped countries, the prevalence rate of ascaris infection is a high 90 percent. In the Philippines, intestinal helminthiasis remains a major public health concern. In a study involving elementary school children in selected sites in Luzon, Visayas and Mindanao, the cumulative prevalence, which is the positivity for at least one type of STH infection, was 67%. A nationwide study also revealed that 66% of preschool children were infected with STH (de Leon and Lumampao, 2005), while a much recent study that served as a baseline for the Integrated Helminth Control Program (IHCP) of  Department of Health (DOH) noted an overall cumulative prevalence of 54.0% and prevalence of heavy intensity infections of 23.1% (Belizario et al., 2009). As per UP National Institute of Health and Department of Health figures, 70 percent of the population has Ascaris. Ascariasis can be treated by the most common treatment which is the Albendazole 400 mg, Mebendazole (Alternative therapy), Vitamin A supplementation and Nitazoxanide. General Objectives: This study is designed to determine the medication of Ascariasis among children and its corresponding treatment. Specific Objectives: This study is delimited to one hundred children’s. Hypothesis: Null NO.1: Hypothesis free No.2: Hypothesis free NO.3: there is no significance difference in the incidence of Ascariasis among children and its corresponding treatment.

Plz chose one Annotated Bibliography Example | Topics and Well Written Essays - 500 words

Plz chose one - Annotated Bibliography Example On the other hand, within the book, the author describes how agriculture and herding had dropped into desertion, trading had stopped, while associations and gatherings to look for solutions were all dissolved. The author is a graduate and an experience individual with a number of studies in various aspects of gastronomy. The book is thus, essential for this study as it has exhaustive information with room for further research. The book is also a legalized and is accessible online as well as in all public libraries. In this article, the author Levi Joseph has gone deep into the Chinese culture to understand there values and life aspects. He, however, found that every part in China naturally developed a unique cooking style, which mirrored its climate, topography, flora, and fauna, the people’s mood and their associations with others. He established that the Filhos de Macau community love food mainly their own cuisine as well as those from different Chinese province. Cantonese and Portuguese are two communities whose food and culture resembles those of the Chinese, where they have even used some common names to refer to different food products. The article also dealt mainly on Macau food, which the community uses them as cultural referent and confirmation of their presences. The article is conclusive in culture, food, and people’s preferences; hence, it is an informative article used by anyone interested in gastronomy. The author is well versed with this areas and he is still carry ing out other researches in the area. This article is an influence to the present discussion on enlarged understanding of hospitality as well as its determination as a robust academic field. According to the author Scarpato, several scholars have currently claimed that both the present study agenda alongside the educational curriculum must be focused on fresh theoretical outline, not limited to the economic statement of hospitality. The article

Review7 Assignment Example | Topics and Well Written Essays - 250 words

Review7 - Assignment Example His determination and strategically planning has been highlighted in the video clip. The interesting fact about this video clip is how it elaborates about the history of the city in precise time in a compact manner. The video has extensively covered all the major efforts of the mayor and also gives a brief and well versed political background of the mayor. The video is compiled in a catchy manner, where in the audience get a bird’s eye view of the city mentioned in the clip. The clip shows the gratitude and honor the city dwellers carry in their mind for the city which is truly appreciative. It is impressive to see the love the people have for the city and to hear how they would like to remain in this place forever. The video clip is presented in a special manner where there is a surprise element. When the video clip starts, it seems to be just like a short documentary about a city in brazil, but as it proceeds it slowly reveal the sole purpose of it. It interestingly and surprisingly reveals the aim of unleashing the unique personality of the mayor who changed the face of a Brazilian city. The video introduces the Mayor who is honored by all since many years because of his dedication to the city and the state as a whole. His plan for the city and the implementation of it is evident in all nook and corner of the city. He changed the infrastructure of the city roads and established road system for comfortable traffic movements. The contribution of the mayor is majorly evident in this video and the manner in which people idolize him is outstanding. The video showcases the mayor ship of this celebrated person of Brazil and his strategy of cleaning the slums and poor and unclean areas of Brazil. The poor were motivated to collect garbage in return of fresh vegetables and fruits which was a great nutritional aid to them. It is also hair rising to watch the road design implemented by the Mayor for the up gradation of city, which in many years proved as a

Automobile firm FORD Essay Example | Topics and Well Written Essays - 3250 words

Automobile firm FORD - Essay Example The rise in taxes in recent years has meant that petrol cars pay more VED. Companies have to take into account other laws such as new car warranties and the laws under the EU treaty such as those regarding location and block exemption. The market is oligopolistic. Ford has a high market share in 3 categories of cars. However, international competition, especially from BRIC countries, is a threat. The Ford brand has lost its appeal to the masses and is now termed as an old brand. In the market, there are high barriers to entry from financial constraints and regulatory requirements. There is threat of substitutes from environment-friendly cars. Backward integration diminishes the power of suppliers. Customers have high bargaining power in this durable goods industry. The future strategies of Ford Motors should be focused on slashing prices, improving brand image and technological innovation. The automobile industry is perhaps an industry that has suffered the most in the current global economic crisis situation. Burdened by the lack of consumer credit and cutbacks in household expenditures, this durable goods industry has had to endure setback in sales growth. Furthermore, the credit crunch has meant that the companies have found hard to draw capital from the pockets of investors. Oil price hikes and increase in credit costs pulled up the costs of manufacturing and put the giant manufacturers in the same league as small manufacturers with regard to problems faced. Companies like Chrysler have had to cut back on production in order to trim their inventories and reduce cost. Revill (2008) reports that Ford will reduce production at its Southampton factory in southern England in 2011 to 35,000 units, less than half of the 75,000 the factory built in 2007. Despite this, the automotive industry has done quite well. According to Auto Industry (2007), in 2006, 1.4 million cars and 208,000 commercial vehicles were produced in the UK. SMMT (2009) reports

Public School Uniforms Rough Draft Research Paper

Public School Uniforms Rough Draft - Research Paper Example Normally, public schools have the freedom of letting their students dress based on their preferences, or else provide them with school uniforms. Despite pros and cons expressed regarding school uniforms, I personally support the idea that the benefits far outstrip the damages. In my opinion, wearing school uniforms should not be just considered as a habit, but should be perceived as an important component in schooling for obvious reasons such as academic improvement and promotion of student behavior. As the name implies, school uniforms promote uniformity in schools. With this regard, a sense of pride is promoted as uniforms promote a sense of uniqueness. Just as students represent the school, school uniforms are extremely important as they also represent the school. The current trends in school uniforms began in 1987 with the first school in Baltimore becoming the first to adopt the trend. This was followed by implementation of a mandatory policy across the district in 1994. The two events happened alongside State of Union in 1996 delivered by Bill Clinton where he encouraged that school uniforms helped in enhancing security. However, this review focusses on effectiveness of school uniforms in enhancing behavior and achievement in public schools. Uniforms play a critical role in promoting academic achievement. Research shows that elementary schools from both urban and rural districts demonstrates improved academic achievement rated in terms of graduation versus suspension and attendance rather than expulsion and academic proficiency rates. In view of this, most researchers concur that the policies on school uniforms contribute largely to the achievement of the student, especially when they become part of a comprehensive reform plan of the school. In United States, the interest in school uniforms grew during Clintons era after their fellow students discriminated some Columbine students for wearing dark colored clothes making them become social outcasts in

Maritime LAW Essay Example | Topics and Well Written Essays - 2000 words

Maritime LAW - Essay Example The notion behind arresting the ship rests in the notion of the ship itself as being the wrongdoer and thereby liable to arrest and offer the same for sale to settle the claims by a creditor. It normally involves securing the appearance of the defendant ship owner and corroborates the jurisdiction of the Court. If the Court permits the maritime creditor’s claim, the verdict is then enforceable against the detained res by judicial sale or security given to assume its place. (Force et al, 2006:262). An action in rem may be initiated against a ship in connection with which a claim arose or against a sister ship. As per the decision held in Gatoil Inc. v Arkwright –Boston Co [1985] A.C. 255 at 265, under the Arrest Convention, there exists a right to initiate an action in rem against another ship of the owner. (Gault et al: 2003:31). An action in rem can be initiated in the High Court against the ship where there exists a maritime lien on the ship and in cases where there e xists a statutory right to proceed in rem. (Gault et al 2003:31). For many centuries, action in rem is the remedy most sought for and used to, and it is being the specialty of the Admiralty Court and for the Courts having parallel jurisdiction and it offers a chief benefit over the same. For initiating any action against a ship is the specialty to proceed in the Admiralty Court directly, and it has been regarded as the illustrious aspect of the Admiralty jurisdiction. Even from the Elizabethan era, the action in rem is being employed in the Admiralty court and however, during the middle of the nineteenth century, the modern theory of maritime liens, i.e. rights against the ship started to evolve. The starting of consideration of the action in rem is itself must lie in the onset of the theory of maritime liens as the two concepts have become interconnected. (Wiswall 1970:155) As per Jervis, maritime lines were the founding stones of actions in rem which was itself a maxim as laid dow n in â€Å"The Bold Cuccleugh† where a solid substantive verdict was given that the action in rem was a proceeding directly against a ship and not a procedural mechanism to enrich personal jurisdiction over owners. (Wiswall 1970:158). Thus, in the case of action in rem, action in personam cannot be claimed was vitiated by the verdict given by Sir Francis Jeune in â€Å"The Dictoar â€Å"in 1891 and when action being in rem, and if any bail that had been offered should stand as a substitute for the ship, and it should be treated as the limit of the liability and it was not proper to award a decree or a judgement in personam in an action in rem. Thus, separate legal proceedings should be initiated for an action to be brought in personam was needed mainly to obtain satisfaction of the balance of the savage award. (Wiswall 1970:158). Traditionally, an action in rem has been considered as an action against the ship itself and does not refer to any action against a ship owner unt il and at least the ship owner acknowledges services of the claim form. â€Å"The House of Lords â€Å"in â€Å"The Indian Grace â€Å"held that under the â€Å"s.34 of the Civil Jurisdiction and Judgments Act, 1982 â€Å", an â€Å"

Defensive Communication Essay Example | Topics and Well Written Essays - 1000 words

Defensive Communication - Essay Example By examining these forms of messages in the context of interpersonal communication, I shall reaffirm previous research findings that defensive communication results in 'losses in efficiency in communication' (Gibb 14). The strategy of defensive communication has various tactics and in the limited space afforded by this paper I will separately analyse in the following order only control messages, dogmatic messages, messages of indifference, and messages of superiority. Control messages predominantly operate as imperatives, commands, and instructions. Control messages therefore imply authority, that is, the 'right to give orders or make decisions' (Lewis). Authority, however, implies varying degrees of power. 'A power relation is a causal relation between the preferences of an actor regarding an outcome and the outcome itself' (Pettigrew 188). For example, a police officer has authority to issue commands and power to enforce those commands. In contrast, a teacher has authority to issue commands and instruction but less power to enforce those commands. Parents like teachers have authority and a limited degree of power. What is more, as the context of one's communication becomes more personal authority and power wan, so that no real power relations exist between friends. For instance, in intimate relations defensive communication can occur when 'individuals are sensitive about their own flaws as well as the flaws of others close to them' (Becker, Ell evold and Stamp 95). Complicating the matter is that not all communication is verbal - body language for instance. So that, without explicit messages or in fact any intent, one may communicate irritation or annoyance. Furthermore, control is not simply the directing of action; 'information may become an instrument for advancing, attacking, or defending status' (Burns and Stalker cited in Pettigrew 189). For example, one may use control messages to avoid a topic of discussion, as in family secrets (see for example Caughlin et al.). Dogmatic messages fall within the compass of defensive communication by virtue of the denotation of dogma; 'a doctrine or code of beliefs accepted as authoritative' (Lewis). In contrast to control messages, that expose authority and power, dogmatic messages expose censorship. Defensive communication in general, and dogmatic messages in particular, involve 'a self-perceived flaw that an individual refuses to admit to another person' (Becker, Halbesleben and O'Hair 144). Resisting the model of a dialogue (Pope 173), dogmatic messages rely on the monologue. For, 'every word is directed towards an answer and cannot escape the profound influence of the answering word that it anticipates' (Bakhtin cited in Pope 235). We may think of a dialogue as the collaboration between people to come to a mutual understanding. Yet in contrast, dogmatic messages attempt to curtail the give-and-take of communication. Such messages contain a deep irony; for, despite the effort to avoid a topic or point via an assertion of strength, the effort itself communicates a defensive attitude grounded on weakness. Dogmatic messages, therefore, undermine any authority or power asserted by a conversational partner. Furthermore, because a dogmatic message

Public School Uniforms Rough Draft Research Paper

Public School Uniforms Rough Draft - Research Paper Example Normally, public schools have the freedom of letting their students dress based on their preferences, or else provide them with school uniforms. Despite pros and cons expressed regarding school uniforms, I personally support the idea that the benefits far outstrip the damages. In my opinion, wearing school uniforms should not be just considered as a habit, but should be perceived as an important component in schooling for obvious reasons such as academic improvement and promotion of student behavior. As the name implies, school uniforms promote uniformity in schools. With this regard, a sense of pride is promoted as uniforms promote a sense of uniqueness. Just as students represent the school, school uniforms are extremely important as they also represent the school. The current trends in school uniforms began in 1987 with the first school in Baltimore becoming the first to adopt the trend. This was followed by implementation of a mandatory policy across the district in 1994. The two events happened alongside State of Union in 1996 delivered by Bill Clinton where he encouraged that school uniforms helped in enhancing security. However, this review focusses on effectiveness of school uniforms in enhancing behavior and achievement in public schools. Uniforms play a critical role in promoting academic achievement. Research shows that elementary schools from both urban and rural districts demonstrates improved academic achievement rated in terms of graduation versus suspension and attendance rather than expulsion and academic proficiency rates. In view of this, most researchers concur that the policies on school uniforms contribute largely to the achievement of the student, especially when they become part of a comprehensive reform plan of the school. In United States, the interest in school uniforms grew during Clintons era after their fellow students discriminated some Columbine students for wearing dark colored clothes making them become social outcasts in

Defensive Communication Essay Example | Topics and Well Written Essays - 1000 words

Defensive Communication - Essay Example By examining these forms of messages in the context of interpersonal communication, I shall reaffirm previous research findings that defensive communication results in 'losses in efficiency in communication' (Gibb 14). The strategy of defensive communication has various tactics and in the limited space afforded by this paper I will separately analyse in the following order only control messages, dogmatic messages, messages of indifference, and messages of superiority. Control messages predominantly operate as imperatives, commands, and instructions. Control messages therefore imply authority, that is, the 'right to give orders or make decisions' (Lewis). Authority, however, implies varying degrees of power. 'A power relation is a causal relation between the preferences of an actor regarding an outcome and the outcome itself' (Pettigrew 188). For example, a police officer has authority to issue commands and power to enforce those commands. In contrast, a teacher has authority to issue commands and instruction but less power to enforce those commands. Parents like teachers have authority and a limited degree of power. What is more, as the context of one's communication becomes more personal authority and power wan, so that no real power relations exist between friends. For instance, in intimate relations defensive communication can occur when 'individuals are sensitive about their own flaws as well as the flaws of others close to them' (Becker, Ell evold and Stamp 95). Complicating the matter is that not all communication is verbal - body language for instance. So that, without explicit messages or in fact any intent, one may communicate irritation or annoyance. Furthermore, control is not simply the directing of action; 'information may become an instrument for advancing, attacking, or defending status' (Burns and Stalker cited in Pettigrew 189). For example, one may use control messages to avoid a topic of discussion, as in family secrets (see for example Caughlin et al.). Dogmatic messages fall within the compass of defensive communication by virtue of the denotation of dogma; 'a doctrine or code of beliefs accepted as authoritative' (Lewis). In contrast to control messages, that expose authority and power, dogmatic messages expose censorship. Defensive communication in general, and dogmatic messages in particular, involve 'a self-perceived flaw that an individual refuses to admit to another person' (Becker, Halbesleben and O'Hair 144). Resisting the model of a dialogue (Pope 173), dogmatic messages rely on the monologue. For, 'every word is directed towards an answer and cannot escape the profound influence of the answering word that it anticipates' (Bakhtin cited in Pope 235). We may think of a dialogue as the collaboration between people to come to a mutual understanding. Yet in contrast, dogmatic messages attempt to curtail the give-and-take of communication. Such messages contain a deep irony; for, despite the effort to avoid a topic or point via an assertion of strength, the effort itself communicates a defensive attitude grounded on weakness. Dogmatic messages, therefore, undermine any authority or power asserted by a conversational partner. Furthermore, because a dogmatic message

Life & Wessex King Essay Example for Free

Life Wessex King Essay Life in the past was characterized with lots of battles between rival territories. This resulted to the rise of powerful empires and the measure of power during those days was through the number of wars fought. Warriors of those days were called Vikings. A Viking also denotes a pirate, merchant or explorer. These Norsemen normally used long ships to travel in the sea to all the places of their interest and used the same vessels to fight their enemies. The Vikings are traced to have originated in the early 17th century in the German territory. The initiator of Vikings in the Iceland is Erik the red. He lived all his life ruling his people after which his son picked the mantle from him (Gwyn, J. 2000). SCANDINAVIA The term Scandinavia is both a historical a major geographical part in the world. There exist also a people who are identified as the Scandinavians. According to the geographical setting, Scandinavia is located in the Northern Europe, a place called Scandinavian Peninsula. The kingdoms that existed in the Scandinavian region include: Finland, Norway and partly Denmark. A lot of research done also reveal that Sweden and Iceland also form part of this robust history. All these regions put together are further referred to as Nordic region. The geographical orientation of Scandinavia is rather ambiguous. The region spreads from the Norwegian Fjords all the way to the low areas in Denmark through the Scandinavian Mountains and to the archipelagos of Sweden and Norway. This region has diverse group of people and for this reason, there exist more that one dialect. The languages that were spoken in these regions included Norway, Sweden and Denmark dialects. These people usually understood each other and thus had mutual understanding. DO THE VIKINGS RIGHTFULLY DESERVE THE REPUTATION THAT THEY WERE CRUEL, MURDEROUS BARBARIANS? WHY? WHY NOT? The Vikings performed most of their ventures through wars. It is evident that a normal way of dressing was to be attire that is characteristic of a warrior. The males had war uniforms all the time. From the first time that the Vikings entered a territory, war had to be fought. It is mandatory that people must die in the event of war. The death of people was so common to these northern tribes that any one could talk of them to be cruel and murderous. Other ventures like sea piracy and looting were associated with brutality and blood shed. The victims of such encounters were left counting their losses if they were not dead. Erik who is one of the founders of the Vikings movement was actually observed to murder many people in his native land until he was expelled to go to exile, the result which led to the discovery of Ice land. EXPLAIN THE ROLE OF WESSEX, IN REGARD TO THE VIKINGS IN ENGLAND. The Wessex territory was known for its great power during the year 878. This territory had great potential that any attacker could admire. Te Wessex King of that time planed for a very efficient army that was to fight and defeat the Viking warriors. This king managed to resist the Vikings and with time became pronounced as Alfred the great. His territory was a centre for trade, commerce and administration. The Vikings however invaded this land and took loots from it as usual. The Wessex region acted as a real opposition to the advances of the Vikings. Every one feared the Vikings. The sight of these raiders approaching a region would send cold shivers down the guts of every king. King Alfred however managed to escape them, even though he was later cornered. The Wessex region became a home of habitation to some Vikings although others separated from the settling camp and continued with invasion. Wessex became a point mark towards bringing an end to the Viking advances in war. HOW DID THE VIKINGS CONTRIBUTE TO THE BREAK-UP OF THE CAROLINGIAN EMPIRE? The Vikings were a major threat to the kings during the Viking age. The Vikings attached Carolingian empire in the year 885 and 886 leading to the defeat of their kings. In 845, the Viking warriors sailed to seine in France and attacked it. The end result of this was a defeat to the Carolingian empire and the kings that followed were just puppet rulers who were initiated by the Vikings. This led to the fall of this empire and it took along time to come up again. EXPLAIN THE VARIOUS PHASES INVOLVED IN VIKING RAIDS. Vikings mainly had 3 phases of raids. The very first phase said to have lasted from 790-840. The Vikings used very shallow draught long ships. They always used these ships because they were suitable majorly for surprise attacks in the coastal towns. The size of these vessels was so small so that the Vikings could rush and attack very fast. With this they attacked Frisia and Aquitane. The second level of attacks occurred between 841 and 875 and the number of raids increased. The Vikings attacked by killing or enslaving their victims. With this, the attacks proceeded to the Mediterranean Sea. 876 to 911 saw the introduction of the third phase. With this, the Vikings started to invade frnce and other parts of Europe. They also developed their own fleets that were used to attack distance empires.

Personal Identity And The Soul

Personal Identity And The Soul The idea of personal identity is a concept we are consciously living but one we are never quite aware of. Our actions are determined by the anticipation of our future pleasures and future pains. This anticipation is shaped by instances in our past where a particular behavior or action on our part creates a result that we find desirable or undesirable. Our soul is that underlying thread that makes a connection between a situation we are faced with in our present lives to what we have lived through from the vast reservoir of our personal experience. Of the different types of personal identity; the Soul Theory, Memory Theory and Brain Theory, I think the soul theory offers the most complete explanation. We are at any given time, the sum total of our collective life experience that includes the people we have met, the situations we have lived through and the stories we have heard of through the people we encounter about others and their life experiences. For there to exist a connection between an individual at one point in their lives and their selves in another point in their lives, these two versions would have to exhibit traits that cannot be acquired through any other means but personal life experience; i.e. actually living through it. Evidence for such traits is evident in the existence of idiosyncratic individual memories and the logic behind setting goals. If an individual were to lock themselves in a room with no windows, furniture or technology, and they were to write on the palm of their left hand the word red, a day later there is no way for anyone else to know what happened inside the room unless that individual were to divulge those details themselves. A day later then, this individual would be the only one to retain the memory of themselves inscribing red onto their left palm, and this individual memory and the inscribed characters prove beyond reasonable doubt that the individual inside that room a day earlier, and the individual who retains the memory the next day are one and the same person. The evidence for this connection is not physical, but a referenced memory. While the letters can be erased, the memory is not as easy to remove. Hence the continuity between these two versions is not physical, but mental. It cannot be quantified or measured physically, and neither can the soul, but its presence in our lives is overwhelming. Our logic when we make decisions in every aspect of life is based on memories of sitiuations that we reference where we were able to obtain a result we find desirable or to avoid a situation at we find undesirable. Our soul, or our conscious self within our body, examines the experiences readily available in our mind at any given point of our lives and chooses a path that would help us attain what we want. Therefore the soul is the chief navigator for our actions and behaviors for the past, present and future. This notion gains even more prominence because the concept of the soul exists independently of religion. It is not dependent of the existence of God. Those who argue against the soul theory may say that the individual traits that are displayed by an individual before and after in the room experiment, exist independently in the body and not the soul. This objection lacks credibility because is fails to account for those that are identical in their physical makeup but have diametrically opposite personality traits. If personality traits were dependent on our physical selves, that would allude to a scenario where people with identical bodies, if put through the exact same situations for long periods of time would develop similar personality traits. Another version of this statement would argue that people with similar physical makeups would react to stress and other highly emotionally demanding situations in similar ways. But there is no evidence for either of these last two statements to gain any credence. The existence of different and even diametrically opposite personality traits amongst survivors in holocaust camps in Nazi Germa ny disproves this objection to the soul theory. Many of these survivors suffered the same horrors and were worn down to similar body types, but the way their conscious selves dealt with those inhumane conditions differed tremendously. The existence of a wide variety of behaviors to combat those inhumane times proves that there was something within each of these bodies that differentiated them from one another. And this difference was the entity of the soul. When thinking of personal identity, we must look at the body and soul as two pieces of the same whole. The sum total of our sensory organs helps us to see, touch, feel and smell every single life experience that we encounter. But without the soul, which is our conscious self, we have no way of classifying this incoming information and relate them to our lives. Such catharsis happens as a result of the soul, which defines our personal identity. Our soul shapes our perspective, and helps us identify what behaviors and actions we should implement when faced with any situation in our lives. We compare what we are experiencing or what we want with other similar situations from our past and look for some residual pattern that can justify an action or behavior that we deem suitable as a response to that individual situation or experience. The body serves as the vessel that aides the soul by providing it a wealth of information, and the soul in turn helps the body navigate through the waters of life. By providing a link between individual versions of each one of us at different times of our lives, the soul theory most completely offers an explanation for personal identity. Personal identity is the notion that each one of us displays certain idiosyncratic traits or identifiers that exist only within ourselves. These identifiers differentiate us from those around us. Since the creation of these identifiers, which are in effect actions/behaviors and personality traits that we pick up through our life experience, is dependent on our conscious thinking during which we weigh the pros and cons of each action/behavior and trait in terms of their effectiveness to get us a desirable result in similar situations in the past, they cannot exist in the absence of a soul. Therefore, the soul theory is indispensible when thinking of personal identity.